Some maintenance points for drive chain

1) The Drive Chain will gradually elongate due to wear during use. In order to prevent the loose edge from sagging too much, which may cause poor meshing, loose edge jitter, and tooth skipping, etc., the chain should be tightened.
2) The lubrication method and lubricant type should be reasonably determined when using drive chain.
3) In order to keep other Other Drive Chain in good working condition, they must be cleaned regularly. Chain cleaning can use mechanical cleaning, chemical cleaning or electrostatic cleaning. Appropriate cleaning processes and cleaning agents should be selected during cleaning to ensure that the chain is clean and to avoid adverse effects on the environment.

4) Carefully check the operation and surface condition of the chain to ensure that the Precision Roller Chain does not have excessive wear, deformation, rust, etc. During the inspection, you should also check the condition of other chain drive components such as sprockets, gears, chain tensioners, etc. to ensure the normal operation of the chain drive

Other drive Chain